PORSCHE 944 GAS CAPS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Cobb tuning is excited to release an all new 1300cc fuel injector, designed in partnership with injector dynamics and Bosch motorsport. This collaboration has given us the ability to offer a high flow injector with characteristics specific to the needs of the motorsport tuner. The cobb 1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatible with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market. While the cobb 1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The cobb 1300 has a minimu...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13
$1,883.25
Make a selection
The latest Cayenne turbo offer from leipzig comes in the form of a more muscular and capable redesign. The Cayenne hit the gym and dropped 550 pounds and shed some wind resistance with a new aero package. Athletic performance is more agile and faster with almost 500 hp (493 hp) from the turbos 4.8 l twin turbo v8. Fortunately Porsche continued to utilize the previous intake from the 957 Cayenne turbo allowing ipd to continue to provide our customers with substantial power and torque gains that will give the new model over 525 horsepower at the wheels.
The ipd Cayenne turbo plenum has an accentuated diversion area and larger inlet openings that increase intake air speed while improving intake air turbulenc...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$1,208.25
Make a selection
This gasket sits on the outside of the window slot to channel the window glass. It can degrade with time and is essential to keep moisture out of the cabin. We recommend replacing the right and left sides together. When inspecting your window guide gaskets, look to see if your window / door caps are missing and need to be replaced, part # 9997033454001c and 9997033444001c. They commonly get brittle and fall out with time. Sold individually. Driver side fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $12.10
Make a selection
This gasket sits on the outside of the window slot to channel the window glass. It can degrade with time and is essential to keep moisture out of the cabin. We recommend replacing the right and left sides together. When inspecting your window guide gaskets, look to see if your window / door caps are missing and need to be replaced, part # 9997033454001c and 9997033444001c. They commonly get brittle and fall out with time. Sold individually. Passenger side fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $12.10
Make a selection
This gasket sits on the inside of the window slot to channel the window glass. It can degrade with time and is essential to keep moisture out of the cabin. We recommend replacing the right and left sides together. When inspecting your window guide gaskets, look to see if your window / door caps are missing and need to be replaced, part # 9997033454001c and 9997033444001c. They commonly get brittle and fall out with time. Sold individually. Driver or passenger side fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $28.50
Make a selection
If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle starting. Eventually you hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter be sure to check the rubber cap on the terminal for cracks which allows moisture in and it is a good idea to check your starters hardware as well.
Features: Bosch remanufactured starter from Germany. Armature continuity tested, gauged, straightened and shimmed. All shaft splines and load bearing surfaces lubricated with oe high temp. Materials. Includes highest quality replacement parts, including starter drive components, solenoid...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76 911 1970-73
From $399.59
Make a selection
Kit includes:
Software dme, sport air filter, sport header system.
Some models require oxygen sensor relocation.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 162kw (220hp) @ 6000rpm
Max. Torque - 270nm (199lbf ft) @ 5500rpm
Max. Speed - 251km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep u...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,747.90
Make a selection
We suggest periodically checking your gas cap seal for fine cracks which produce fumes. If you replace the cap and the fumes persist, check the fuel filler neck, fuel lines, expansion tank and vent shut off valves. Genuine, non-locking, screw type fuel cap sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $108.90
Make a selection
Get the xenon look with sylvania silverstar bulbs. Silverstar halogen headlights are the brightest, 100% street legal halogen on the road- burning cleaner and crisper, with a white-hot intensity that will set you and your machine apart. Silverstar headlights are the only halogens that capture the high performance look of hid, changing your view of the night.
Low beam headlight bulb. Fits the following models:
911 1998-04
911 2005-08
Boxster 2005-09
Cayman 2006-08
Cayenne 2003-09
General Fitment 911 GT3 2007-11 911 2005-08 CAYENNE 2007-10 CAYENNE 2003-06 BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05
The girodisc system is a direct replacement for the oe disc on all 996 GT2/gt3's. No modifications are necessary. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency. The girodisc front rotors are approx 21.0 lbs vs. 25.6 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 1998-05
$1,620.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers and longer bolts. Girodisc rotor is slightly larger than the OEM rotor at 350mm versus 330mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 ...(choose a part on the right to read more)
General Fitment 911 1998-05 911 TURBO/GT2 2001-05 911 2005-08
$1,620.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 350mm versus 340mm providing greater braking force and cooling capacity. The girodisc front rotors are approx 21.0 lbs vs. 24.4 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved van...(choose a part on the right to read more)
General Fitment 911 2009-12
$1,620.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 325mm versus 298mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high streng...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$1,485.00
Make a selection
The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 325mm versus 298mm providing greater braking force and cooling capacity.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high streng...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$1,485.00
Make a selection
Our rubber kits are for the perfect restoration. Available only from Automobile Atlanta, this kit consists of everything we use in our restoration shop.
Kit consists of:
2 - b91463140506 - side marker seal gasket 914 - two required - normally $18.02
2 - b91463195710 - 914 front turn signal seal - two required - normally $28.62
1 - b91451190110 - front trunk hood seal 914 - normally $76.00
1 - b91451190210 - front bulkhead seal; 914 1970-76 - normally $20.09
2 - r91462820311 - swf washer nozzle (oem) - normally $19.60
2 - r90162892600 - genuine Porsche wiper arm cap 911 914 912-89 - normally $12.40
2 - b91455915510 - 914 fender to cowl seal - normally $9.00
1 - b91455226310 - ...(choose a part on the right to read more)
General Fitment 914 1970-76
$1,012.23
Make a selection
The girodisc system is a direct replacement for the oe disc on all 997.1 GT3/gt2's, both pccb and non-pccb equipped vehicles.
The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by girodisc in the usa to girodisc own specifications and cadmium plated for a l...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13 911 2009-12 911 1998-05 911 2005-08
$1,620.00
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 60...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,835.10
Make a selection
Exhaust system with valves for the 997 -08
Facts:
- equal length headers with long tube design
- 100 cell German hjs sport catalysts with u torque design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,792.70
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
FVD primary muffler bypass system for 2009- 997/997s
Fit with and without factory sport valved exhaust !
Facts (based on 997s):
- + 5 crank hp & + 4 crank torque gain
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- 5.5 lbs weight savings
- t 316 stainless steel for improved durability over t 304
- adjustable design for easy installation
- includes quick release clamps
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
- fits with or without sound switch system
- weight: 4.6kg (10.14lbs)
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,543.30
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|